Install Covers On Roof Lining - AR68.30-P-4300-13LWT

Model 213.2 

The following operation steps are shown on cover installation on right rear.

Carry out operation steps on all further covers similarly.

1. Insert and engage frame (2) as shown with opening (arrow A) facing toward center of roof trim (3).

   Courtesy of MERCEDES-BENZ USA

2. Insert cover (1) in frame (2) beginning at the bottom with the engagements (4).
3. Press frame (2) against roof trim in area of left catch hook (5).
4. At the same time, press in cover (1) from the bottom until left catch hook (5) audibly engages.

   Courtesy of MERCEDES-BENZ USA

5. Press frame (2) against roof trim in area of right catch hook (6).
6. At the same time, press in cover (1) from the bottom until right catch hook (6) audibly engages.

   Courtesy of MERCEDES-BENZ USA

7. Check frame (2) and catch hooks (4, 5, 6) are correctly seated.

   The catch hooks (4, 5, 6) must be visible and correctly engaged in frame (2) as shown.

   Courtesy of MERCEDES-BENZ USA