Detach/Attach A-Pillar Trim - AR68.30-P-4050-03LWA

Model 205.0/1/2/3, 213, 253, 293 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

1. Unclip cover (2) with clip remover.
2. Detach edge guard (3) in area of A-pillar paneling (1).

   : Ensure that edge guard (3) is seated correctly.

3. Unclip A-pillar trim (1) using long wedge at retaining clip (4) and retaining clamp (5).
4. Slightly pivot A-pillar paneling (1) at top toward inside and remove toward rear out of instrument panel.
5. Install in the reverse order.
   Fig 1: A-Pillar Trim Component Location - Model 213

   Courtesy of MERCEDES-BENZ USA