Remove/Install Armrest On Rear Door - AR72.12-P-1020LWE

Model 213 

Fig 1: Armrest On Rear Door Components Location - Model 213

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove door lining (1).		AR72.12-P-1010LW
2	Unscrew screws (4).
3.1	Drill plastic spot welds (3) and remove armrest (2).	If the armrest (2) is attached using plastic spot welds (3).	AR72.00-P-0001-01LW
		: Replace drilled plastic spot welds (3) with screws. Attach armrest (2) using screws from the repair kit.
3.2	Remove screws and take off the armrest (2).	If the armrest (2) is attached using screws.
4	Install in the reverse order