Retrofit Speed Limit Assist - AN54.30-P-0100EC

MODEL 207 as of 1/1/11, 212 as of 1/1/11, 218 as of 1/1/11 

with CODE 238 (Active lane keeping Assist) 

with CODE 512 (COMAND APS with DVD changer) 

with CODE 527 (COMAND APS with single DVD drive (with navigation)) 

with CODE 476 (Lane keeping assist) 

MODEL 207, 212, 218 

with CODE 531 (COMAND APS) 

with CODE 476 (Lane keeping assist) 

	Initial startup
1	Order retrofitting via parts ordering process, specifying vehicle identification number (FIN)	Further information in Aftersales portal under: Info Center PIT Aftersales Parts Genuine parts Cars
	Update Vehicle Documentation (VeDoc)
2	Check if CODE 513 (Traffic Sign Assist) is entered on the on-line vehicle data card
3	Attach note "Speed Limit Assist retrofitted as per AN54.30-P-0100EC " in Vehicle Documentation (VeDoc) under field organization texts to design group 54
4	Connect diagnostic system and select vehicle using FIN		AD00.00-P-2000-04A
5	Carry out variant coding using software calibration number (SCN)	"Central gateway (CGW)" "Chassis gateway (FWGW)" "Multifunction camera (MFK)" "Front signal acquisition and actuation module (SAM FRONT)" "Instrument cluster (IC)" "COMAND"
6	Disconnect diagnostic system		AD00.00-P-2000-04A
7	Perform function test	See Owner's Manual.