Component Description For Audio/Command Display - GF54.30-P-6150FQ

MODEL 218 up to 8/31/14

without CODE 867 (SPLITVIEW)

Fig 1: Audio/Command Display Components Location - Model 218 Up To 8/31/14 Without Code 867 (Splitview)

Courtesy of MERCEDES-BENZ USA

Illustrated on model 218.3

Location

The Audio/COMMAND display is integrated at the top center in the instrument panel.

Task

The Audio/COMMAND display shows all map, control and information data as well as, depending on the equipment involved, video, TV and Internet signals (as of 1.7.11). The Audio/COMMAND display performs the following tasks for this purpose:

Reading in of signals
Evaluation of input factors

Reading in of signals

The input factors are read in via the following connections:

Telematics CAN (CAN A)
Low voltage differential signal (LVDS) interface

Telematics CAN

The Audio/COMMAND display receives control signals (e.g. brightness, on or off display) over the telematics CAN.

LVDS interface

The Audio/COMMAND display receives all the information required to display the graphical content from the audio equipment over the LVDS interface.

Evaluation of input factors

The input factors are evaluated by the integrated microprocessor and the color screen is then actuated internally.

Variants

"High" variant (with CODE 512 (COMMAND APS incl. DVD changer), with CODE 526 (COMMAND with single DVD drive (without navigation)), with CODE 527 (COMMAND APS with single DVD drive (with navigation)) or with CODE 528 (COMMAND incl. DVD changer)):

Permanent 7-color screen
3-D display
800x480 pixel resolution

"Mid" variant (with CODE 510 (Audio 20 with CD changer) or CODE 523 (MB Audio 20 APS radio) or CODE 511 (Audio 50 APS incl. DVD changer) or CODE 525 (MB Audio 50 APS radio)):

Permanent 5, 8-color screen
2-D display
400x240 pixel resolution

Wiring diagram for Audio/COMMAND display

PE82.00-P-2080-97XAA