Remove/install sun visor - AR68.60-P-5480NKB

MODEL 117, 156, 176, 205, 217, 242, 246, 253 

Shown on model 176 

Fig 1: Sun Visor Remove/Install Components - Shown On Model 176

Courtesy of MERCEDES-BENZ USA

	Remove
1	Fold down sun visor (1), unhook from bracket (3) and pivot to side
2	Unclip cover (6) from hinge (2) and remove	Use 1x5.5 offset screwdriver.
3	Unclip cover (4) from bracket (3) and remove	Use 1x5.5 offset screwdriver.
4	Press clips (5) together on bracket (3) and remove bracket (3)
5	Press clips (5) together on hinge (2) and remove sun visor (1)	Observe hook (7).
	Install
6	Clip cover (4) and clips (5) into bracket (3)
7	Clip bracket (3) into roof	The bracket (3) is clipped in completely preassembled.
8	Clip cover (6) and clips (5) into hinge (2)
9	Guide hinge (2) on sun visor (1) into roof and clip in	The hinge (2) is clipped in completely preassembled. When installing in roof, observe hook (7).
10	Hook sun visor (1) into bracket (3) and fold up