Remove/install paneling on A-pillar - AR68.30-P-4050NKB

MODEL 117, 156, 176, 242, 246 

Shown on MODEL 246 

Fig 1: A-Pillar Paneling Remove/Install Components - Shown On Model 246

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove edge guard (2) in area of A-pillar paneling (1)
2	Unclip cover (3)	Clip remover	Figure
3	Unclip A-pillar paneling (1) from top and slightly pivot at top toward inside	Clip remover	Figure
4	Guide A-pillar paneling (1) out of instrument panel (4)	Insert cover (3) into clips (5) on A-pillar paneling (1).
5	Install in the reverse order

Fig 2: Clip Remover (452 589 01 63 00)

Courtesy of MERCEDES-BENZ USA