Remove/install handle on roof - AR68.30-P-4330NKB
MODEL 117, 156, 176, 205, 242, 246, 253
Shown on MODEL 246
| Remove | |||
| 1 | Remove covers (2) | ||
| 2 | Press clips (3) together and remove grab handle (1) | ||
| 3 | Disconnect electrical connector from rear illumination on rear grab handle (1) | Model 156 with code 413 (Automatic panoramic sliding sunroof) Model 205 with code 876 (Interior Light package) Model 253 with code 876 (Interior Light package) |
|
| 4 | Remove clips (3) from body | ||
| Install | |||
| 5 | Clip clips (3) and covers (2) into grab handle (1) | ||
| 6 | Disconnect electrical connector from rear illumination on rear grab handle (1) | Model 156 with code 413 (Automatic panoramic sliding sunroof) Model 205 with code 876 (Interior Light package) Model 253 with code 876 (Interior Light package) |
|
| 7 | Clip grab handle (1) into roof | ||
| Check | |||
| 8 | Completely fold out grab handle (1), pull downward and check whether it is seated tightly at both mounting points |