Prepare Panoramic Roof Frame Body Flange For Installation - AR77.21-P-0800-05NKX
Model 156
with code 413 (Automatic panoramic sliding sunroof)
Model 205
with code 413 (Automatic panoramic sliding sunroof)
Model 253
with code 413 (Automatic panoramic sliding sunroof)
| Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
MODIFICATION NOTES
| 16.04.2018 | Notes on removal/installation of bonded elements of panoramic roof added. |
- Cut off residual adhesive material (1) on body flange to a max. height of 1 mm with scraper.
- Remove glue residues (1) cut from body flange.
- Check body grommets on area of front roof frame for damage.
If there is a problem,
↓
replace respective body grommet.
↓
repair paint damage on body flange.
- Check body flange for paint damage.
If there is a problem,
- Apply primer in respective bonding area.
With residual adhesive material (1) missing in bonding area only.
Shown on model 156