Retrofit Draft Stop - AN77.25-P-2199LWR

Model 205.4 

Courtesy of MERCEDES-BENZ USA

Shown on right side of vehicle 

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove left and right upper side trim in rear
			AR68.30-P-4783LWR
	Install
2	Modify left and right upper side trim in rear for retrofitting of draft stop (1)		AN77.25-P-2199-01LWR
3	Clip bracket (2) into reinforcement (3)	Shown on right side of vehicle. Installation on left side of vehicle is analogous.
4	Install left and right upper side trim in rear
		Hit the extending cover (4) inwards. Remove trim rings (5) and bolts (6) from draft stop parts kit.	AR68.30-P-4783LWR
5	Open draft stop (1) and install
	Update Vehicle Documentation (VeDoc)
6	Enter special equipment in online vehicle data card	Code 285  (draft stop)
7	Attach note "Draft stop retrofitted as per AN77.25-P-2199LWR" under field organization texts in (DG 92)