Risk Of Injury When Performing Check And Repair Work In Area Of Roll Bar - AS91.00-Z-0003-01LCA

Model 205.4 

Model 217.4 

Model 238.4 

Risk of injury 

Keep body parts out of the area where the roll bars extend.

Do not use the cover in the area of the roll bar as a storage place for objects.

When working in the area of the roll bar, serious injuries can occur due to sudden extension of the roll bar. The roll bar is spring-loaded.

General rules of conduct and safety precautions

• Keep body parts out of the area where the roll bars extend. Particularly during diagnosis and maintenance work on the Supplemental Restraint System control unit (N2/10) (the corresponding sensors are integrated in the Supplemental Restraint System control unit (N2/10)).
• Hold the roll bars via the plastic housing and always keep extendable parts away from your body!
• The roll bars are to be handled such that injury is unlikely in the event of unintentional activation.
• Always set down/store removed roll bars on a level surface so that these do not pose a hazard.
• Do not set down any objects in the area of the roll bar, particularly not on the crossmember trim.