Torque Coordination, Basic Function - GF07.10-P-1060A

Engine all (CAR) 

General 

The torque coordination coordinates and prioritizes the torque requests of all vehicle systems made to the engine or, for a hybrid vehicle, made to the hybrid system.

Function requirements 

• Engine management ON (circuit 87M)
• Engine runs

Coordinate engine torque 

Various vehicle systems can request engine torque, such as the accelerator pedal or speed control. These torque requests can contradict each other.

To coordinate the various torque requests, the torque coordination intervenes in the engine management system.

For the decision as to which torque request will be permitted, the torque coordination uses, among other things, the following information:

• Driveability

  The torque coordination judges whether good driveability is guaranteed. For example, torque requests that are uncomfortable to the driver are prevented.

• Specified priority

  For various systems, different priorities are specified for torque requests. For example, driving safety systems have a higher priority than driver assistance systems.

For a hybrid vehicle, the torque coordination uses information from the electric drive, from the high-voltage battery, and from the automatic transmission in addition.

Request engine torque 

The following vehicle systems can make an engine torque request, among other things:

• The driver, via the accelerator pedal sensor
• The brake and traction control system
• Speed control and speed limiter
• Transmission control
• Distance control
• RPM limitation
• Maximum vehicle speed limit
• Maximum torque limitation

Adjust engine torque 

The combustion engine control unit adapts the engine torque via the following parameters:

• Extending or shortening the injection duration of the fuel injectors
• Advanced or retarding the ignition angle
• A combination of adjustment of the injection duration and adjustment of the ignition angles
• Hybrid vehicle: Drive torque of the electric machine

Spark-ignition engine: Use torque reserve 

To increase the engine torque quickly and comfortably for the driver, the torque reserve must be used.

A torque reserve is achieved by extending the injection period, while simultaneously adjusting the ignition angles to "retarded". This will enrich the fuel-air mixture, while at the same time preventing a premature torque increase due to the retarding of the timing. Setting the ignition angles to "early" results in the engine torque being increased.

	Function schematic
	Function schematic for torque coordination	Engine 608 in model 118, 177, 247	PE07.10-P-2501A
		Engine 282 in model 118, 177, 247	PE07.10-P-2501B
		Engine 256 in model 167	PE07.10-P-2501E