Press Deep-Groove Ball Bearing In/Out Of Elastomer Bearing Of Propeller Shaft - AR41.10-P-0100-02LW

Model 205, 253 

Fig 1: Identifying Removal And Installation Tool (116 589 09 43 00)

Courtesy of MERCEDES-BENZ USA

Press out 

1. Press out grooved ball bearing (8) out of elastomer bearing (7b) using press out/in tool (04a, 04b).

   Courtesy of MERCEDES-BENZ USA

   Press in 

2. Press grooved ball bearing (8) into the rubberized bearing seat up to the contact surface (arrows) using press out/in tool (04a, 04b).

   Ensure that the grooved ball bearing (8) is properly seated.

Courtesy of MERCEDES-BENZ USA