Remove/Install Side Paneling In Rear - AR68.30-P-4780CLW

Model 205.3 

Shown on left side of vehicle 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove door sill molding		AR68.30-P-4100CLW
2	Remove backrest in rear		AR91.12-P-1720LW
3	Remove side upholstery		AR91.12-P-1710LW
4	Unclip cover (2) and remove	Mounting wedge	Fig 1
5	Remove bolts (3)
6	Unclip side paneling (1) and remove	Model 205.3 except code 810 (Sound system)
7	Loosen side paneling (1) until electrical connectors (4) are accessible	Model 205.3 with code 810 (Sound system) Carefully loosen left and right side paneling (1). Otherwise the electrical connectors (4) can be damaged.
8	Disconnect electrical connectors (4) and remove side paneling (1)	Model 205.3 with code 810 (Sound system)
9	Install in the reverse order

Fig 1: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA