LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2017 >> B250 Base >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System - Body - 246 Chassis - 1 Of 2 >> Testing & Repair >> Update map data for navigation system - AR82.85-P-0100A

Update map data for navigation system - AR82.85-P-0100A

MODEL 117, 156, 164, 166, 169, 172, 176, 190, 197, 204, 205, 207, 212, 216, 217, 218, 221, 222, 231, 242, 245, 246, 251, 463 

Shown on MODEL 204, German GUI language 

Fig 1: Screen Display - Navigation System Update Map Data
G09977666Courtesy of MERCEDES-BENZ USA
  Prepare update     
1 Check whether a map data update is available to the customer free of charge    
REFER TO DESCRIPTION & OPERATION Service Information: Free map updates for COMAND   SI82.85-P-0019A
2 Activation code for map data update available in Vehicle Documentation (VeDoc)    
REFER TO DESCRIPTION & OPERATION Service information: Copy protection in navigation unit with hard-disk navigation MODEL 117, 166, 172, 176, 190, 205, 217, 222, 231, 246
MODEL 204.0/2/3, 216, 221
with CODE 802 (Model year 2012)
MODEL 204.0/2/3/9, 207, 212, 216, 218, 221
with CODE 803 (Model year 2013)
MODEL 204.0/2/3/9, 207, 212, 218 with CODE 804 (Model year 2014)
MODEL 204.0/2/3/9, 207, 212, 218 with CODE 805 (Model year 2015)
MODEL 207, 212, 218
with CODE 088 (Control code NTG 4.5)
with CODE 801 (Model year 2011)
MODEL 207, 212, 218
with CODE 088 (Control code NTG 4.5)
with CODE 802 (Model year 2012)
MODEL 216, 221
with CODE 800 (Model year 2010)
MODEL 216, 221
with CODE 801 (Model year 2011)
MODEL 463
with CODE EU2 (COMAND Online)
SI82.85-P-0018A
3 Check state of charge (SOC) of the high-voltage battery MODEL 212.095/098/195/298 without CODE 494 (US version)  
REFER TO DESCRIPTION & OPERATION Service Information: Programming of control units   SI54.21-P-0008B
4 Open engine hood MODEL 117, 156, 164, 166, 169, 172, 176, 190, 197, 204, 205, 207, 212, 216, 217, 218, 221, 222, 231, 242, 245, 246, 251, 463  
    MODEL 204.3, 207, 212 AR88.40-P-1000EW
    MODEL 164 AR88.40-P-1000GZ
    MODEL 166 AR88.40-P-1000GQ
    MODEL 172.4 AR88.40-P-1000V
    MODEL 251 AR88.40-P-1000RT
    MODEL 463 AR88.40-P-1000GG
DANGER Risk of explosion  from explosive gas. Risk of poisoning  and caustic burns from swallowing battery electrolyte. Risk of injury  through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. AS54.10-Z-0001-01A
5 Connect battery charger    
NOTES Notes on battery   AH54.10-P-0001-01A
6 Switch ignition lock to position "1" (circuit 15R)    
7 Switch on COMAND controller unit    
8 Remove CDs or DVDs from the COMAND disc drive When updating using the master DVD  
  Update     
9.1 Insert the master DVD and update map data MODEL 117, 156, 164, 166, 169, 172, 176, 190, 197, 204, 205, 207, 212, 216, 217, 218, 221, 222, 231, 242, 245, 246, 251, 463
When updating using the master DVD
IMPORTANT Enter the activation code provided in VeDoc and start with the update.
IMPORTANT Any error messages that may be displayed should be ignored. The update process can take a while to complete. The progress bar indicates how much has been completed. If there are multiple master DVDs, follow the instructions on the COMAND display.
 
9.2 Start the menu from the master USB stick and update the map data MODEL 117, 156, 166, 172, 176, 190, 204, 205, 207, 212, 217, 218, 222, 231, 242, 246, 463
When updating using the master USB stick (from NTG 4.5 onwards)
IMPORTANT Enter the activation code provided in VeDoc and start with the update.
IMPORTANT The update process can take a while to complete. The progress bar indicates how much has been completed.
 
10.1 Remove all master DVDs from the vehicle and insert the previously removed CDs or DVDs MODEL 117, 156, 164, 166, 169, 172, 176, 190, 197, 204, 205, 207, 212, 216, 217, 218, 221, 222, 231, 242, 245, 246, 251, 463
After updating using the master DVD
 
10.2 Remove USB stick from the front USB connections MODEL 117, 156, 166, 172, 176, 190, 204, 205, 207, 212, 217, 218, 222, 231, 242, 246, 463 After updating using the master USB stick (from NTG 4.5 onwards)  
11 Switch off COMAND control unit    
12 Switch off ignition    
DANGER Risk of explosion  from explosive gas. Risk of poisoning and caustic burns  from swallowing battery electrolyte. Risk of injury  through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. AS54.10-Z-0001-01A
13 Disconnect battery charger    
NOTES Notes on battery   AH54.10-P-0001-01A
    IMPORTANT Switch off the charger before disconnecting it.  
14 Close engine hood MODEL 117, 156, 164, 166, 169, 172, 176, 190, 197, 204, 205, 207, 212, 216, 217, 218, 221, 222, 231, 242, 245, 246, 251, 463  
    MODEL 204.3, 207, 212 AR88.40-P-1000EW
    MODEL 164 AR88.40-P-1000GZ
    MODEL 166 AR88.40-P-1000GQ
    MODEL 172.4 AR88.40-P-1000V
    MODEL 251 AR88.40-P-1000RT
    MODEL 463 AR88.40-P-1000GG