LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2017 >> B250 Base >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System - Body - 246 Chassis - 1 Of 2 >> Testing & Repair >> Remove/install telescoping nozzle for headlamp cleaning system - AR82.15-P-6100NKB

Remove/install telescoping nozzle for headlamp cleaning system - AR82.15-P-6100NKB

MODEL 117, 156, 242, 246 with CODE 600 (Headlamp cleaning system) 

MODEL 176 up to model year 2016 with CODE 600 (Headlamp cleaning system) 

Shown on model 246 with code 600 (Headlamp cleaning system) 

Fig 1: Identifying Headlamp Cleaning System Telescoping Nozzle Remove/Install Components - Shown On Model 246 With Code 600 (1 Of 2)
G10250638Courtesy of MERCEDES-BENZ USA
Fig 2: Identifying Headlamp Cleaning System Telescoping Nozzle Remove/Install Components - Shown On Model 246 With Code 600 (2 Of 2)
G10250639Courtesy of MERCEDES-BENZ USA
DANGER Risk of fire and explosion  caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning  caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury  or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin. Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children. AS82.35-Z-0001-01A
REMOVING Remove     
3 Loosen fender liner at right or left front and pull to one side until telescopic nozzle (1) is accessible   AR88.10-P-1300NKB
4 Open covering (2) at right or left    
5 Release catch hook (3) using suitable tool (4)    
6 Slide telescopic nozzle (1) to front and out    
7 Release hose coupling (5) and disconnect washer fluid hose (6) from telescopic nozzle (1) IMPORTANT Escaping washer fluid must be collected in a suitable container.  
INSTALLING Install     
8 Connect washer fluid hose (6) with telescopic nozzle (1) and lock hose coupling (5)    
9 Insert telescopic nozzle (1) in guides    
10 Lightly push telescopic nozzle (1) upwards against resistance of catch hook (3) and slide to rear until it latches into place    
11 Close cover (2) at right or left    
12 Install fender liner at right or left front   AR88.10-P-1300NKB
INSPECT Check     
13 Check the fluid level in the windshield washer system    
REFER TO MAINTENANCE     AP82.35-P-8210AK 
If the fluid level is too low

Correct fluid level
 
14 Check function of headlamp cleaning system    
REFER TO MAINTENANCE     AP82.30-P-8252AK