Check wiper arms and adjust - AR82.30-P-6000NKB

MODEL 117, 156, 176, 242, 246 

Shown on MODEL 246 

Fig 1: Identifying Driver/Passenger Side Wiper Arms - Shown On Model 246

Courtesy of MERCEDES-BENZ USA

	Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.	Always remove ignition key when working on windshield wiper mechanism.	AS82.30-Z-0001-01A
	Check
1	Bring wiper system into park position
2	Switch off ignition and remove transmitter key
3	Remove wiper blades	When working on raised driver-side wiper arm (1) or passenger side wiper arm (2), ensure that it does not fall onto the windshield. Otherwise the windshield can be damaged.
4	Clean wiper blade mounts on driver-side wiper arm (1) and passenger-side wiper arm (2) using a clean cloth
5	Check angle of incidence of driver-side wiper arm (1) and passenger-side wiper arm (2) to windshield		AR82.30-P-6000-01NKB
		Angle of incidence of driver-side wiper arm in park position	*BE82.30-P-1001-01H
		Angle of incidence of passenger-side wiper arm in park position	*BE82.30-P-1002-01H
		Adjusting tool set	Fig 3
		Adapter	Fig 2
6	Adjust angle of incidence of driver-side wiper arm (1) or passenger-side wiper arm (2)	If check values deviate from the tolerance range of the adjustment values.
			AR82.30-P-6100-01NKB
		Angle of incidence of driver-side wiper arm in park position	*BE82.30-P-1001-01H
		Angle of incidence of passenger-side wiper arm in park position	*BE82.30-P-1002-01H
		Adjusting tool set	Fig 3
		Adapter	Fig 2
7	Install wiper blades

Fig 2: Identifying Adapter (211 589 05 21 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Adjusting Tool Set (211 589 02 21 00)

Courtesy of MERCEDES-BENZ USA