Remove/install radio - AR82.60-P-7502W
MODEL 172.4 with CODE (510) Audio 20 with CD changer with CODE (512) COMAND APS with DVD changer with CODE (523) MB Audio 20 radio with CODE (527) COMAND APS with single DVD drive (with navigation) with CODE (528) COMAND with DVD changer
Shown with code (527) COMAND APS with single DVD drive (with navigation)
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Connect Star Diagnosis and perform initial startup of radio (A2) or COMAND controller unit (A40/3) | When replacing radio (A2) or COMAND controller unit (A40/3). | AD00.00-P-2000-04A |
| 2 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | ||
| 3 | Remove center console cover (1) | AR68.20-P-2000W | |
| 4 | Unscrew bolts (arrows). | ||
| 5 | Disconnect electrical connector (2) and pull radio (A2) or COMAND controller unit (A40/3) out of instrument panel until electrical connectors and optical fiber coupling on the back of the device are accessible | ||
| 6 | Disconnect electrical connectors and optical fiber coupling on back side of radio (A2) or COMAND controller unit (A40/3) and remove radio (A2) or COMAND controller unit (A40/3) | ||
| Notes on avoiding damage to optical fibers during repair work | With Media Oriented System Transport (MOST) | AH82.60-P-0001-05AK | |
| 7 | Remove upper control panel control unit. | When replacing radio (A2) or COMAND controller unit (A40/3). | AR54.21-P-1262W |
| 8 | Install in the reverse order |