Remove/install fanfare horns - AR54.35-P-1555RK
MODEL 231
Shown with engine compartment paneling removed
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Remove/install | |||
| 1 | Switch off ignition and remove transmitter key (A8/1) or KEYLESS-GO start/stop button (S2/3) from electronic ignition lock control unit (N73) | ||
| 2 | Loosen left/right front fender liner in lower area until left horn (H2) or right horn (H2/1) is accessible | AR88.10-P-1300RK | |
| 3 | Disconnect electrical connection (3) | ||
| 4 | Unscrew screw/bolt (1) and remove left horn (H2) or right horn (H2/1) with bracket (2) | ||
| 5 | Install in the reverse order |