Attaching Mercedes-Benz quick-clamping devices - AR40.20-P-0230I

MODEL 209, 211, 215, 219, 220, 230, 231, 240 

Shows model 220 

Fig 1: Attaching Mercedes-Benz Quick-Clamping Devices - Shown On Model 220 (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Attaching Mercedes-Benz Quick-Clamping Devices - Shown On Model 220 (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Installing, removing
1	Attach quick-clamping devices to the front and rear wheels, remove clamping handles	The mounting bell is centered on the front wheel hub or rear axle shaft flange by locating the tracer pins in the five mounting holes (arrows) in the rim. Check the quick-clamping devices, wheel mirrors or measurement pickups at regular intervals as per the manufacturer's specifications.
		Quick-clamping device	Fig 3
2	Attach wheel mirrors or measurement sensors
3	Remove in the reverse order

Fig 3: Identifying Quick-Clamping Device (124 589 01 31 00)

Courtesy of MERCEDES-BENZ USA