Remove/install 115V/230V socket - AR54.10-P-1002LFA
MODEL 222
with CODE 224 (First-Class rear compartment)
with CODE U67 (230 V socket in the rear)
MODEL 222
with CODE 224 (First-Class rear compartment)
with CODE U80 (115 V socket)
| Risk of death from touching live components with AC voltages over 30 V | Do not touch live parts. Persons who have electronic implants (e.g. cardiac pacemakers) must not perform any work on components conducting AC voltage greater than 30 V. | AS54.00-Z-0001-05A | |
| Remove/install | |||
| 1 | Detach ground line from battery | AR54.10-P-0003LF | |
| 2 | Open armrest cover (32) on center console of the rear compartment (25) | ||
| 3 | Set folding table in center console of the rear compartment (25) upright | MODEL 222 with CODE 449 (Rear folding table) | |
| 4 | Release bracket (33) with extraction hook (34) and fold forward far enough (arrow) until the interior lamp (35) is accessible | Fig 2 | |
| 5 | Detach interior lamp (35) from optical fiber | ||
| 6 | Unclip socket (36) forward out of the bracket (33), rotate through 90° and route with connected lines out through the bracket (33) | ||
| 7 | Unclip socket (37) forward out of the bracket (33), rotate through 90° and route with connected lines out through the bracket (33) | ||
| 8 | Unclip socket (X58/42, X48/44) forwards out of bracket (33) | ||
| 9 | Detach electrical connection (38) from socket (X58/42, X48/44) and remove socket (X58/42, X48/44) | ||
| 10 | Install in the reverse order |