Remove/install trim piece on front of center console - AR68.20-P-2101LF
MODEL 217, 222.0/1/9
| Remove | |||
| 1 | Open front stowage compartment cover | ||
| 2 | Open splash guard cap (4) | ||
| 3 | Press retaining tabs (34) downward (arrow direction A) and pull trim piece (35) toward rear (arrow direction B) | ||
| 4 | Open stowage compartment (36) on instrument panel | ||
| 5 | Lift trim piece (35) and pull out toward rear | ||
| Install | |||
| 6 | Open stowage compartment (36) on instrument panel | ||
| 7 | Lay trim piece (35) down on center console | ||
| 8 | Close stowage compartment (36) on instrument panel | ||
| 9 | Push trim piece (35) toward front (arrows E) | ||
| 10 | Close front stowage compartment cover | ||
| Check | |||
| 11 | Trim piece (35) and stowage compartment cover should run parallel |