Replace mounting brackets of connecting struts - AP62.30-P-0060A

MODEL 222 with CODE Z07 (Top protection)

Shown on engine 277 in model 222.976

Fig 1: Fastening Bracket, Nut And Bolts - Shown On Model 222.976

G11131643

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove nuts (2) of mounting brackets (1)
2	Remove screws/bolts (3) of mounting brackets (1)
3	Remove mounting brackets (1)
	Install
4	Install new mounting brackets (1)
5	Tighten screws/bolts (3) of mounting brackets (1)	Bolt, reinforcement to firewall/longitudinal member/reinforcement, center	*BA62.25-P-1001-01B
6	Tighten nuts (2) of mounting brackets (1)	Nut, suspension strut at front to body	*BA32.25-P-1001-04O

SUSPENSION STRUTS

Number	Designation		MODEL 222 with CODE Z07
BA32.25-P-1001-04O	Nut, suspension strut at front to body	Nm	50

FIREWALL

Number	Designation			Model 222
BA62.25-P-1001-01B	Bolt, reinforcement to firewall/longitudinal member/reinforcement, center	M6	Nm	9
BA62.25-P-1001-01B		M8	Nm	30