Remove/install AIRmatic central reservoir - AR32.22-P-2017LF

MODEL 217 as of 12/1/14 

without CODE 487 (Active Body Control (ABC)) 

without CODE M005 (4MATIC) 

MODEL 217 up to 11/30/14 

without CODE 487 (Active Body Control (ABC)) 

MODEL 217.378 as of 12/1/14 

with CODE M005 (4MATIC) 

without CODE 487 (Active Body Control (ABC)) 

MODEL 222 (except 222.178) as of 11/27/14 

with CODE M005 (4MATIC) 

with CODE Z07 (Top protection) 

without CODE 487 (Active Body Control (ABC)) 

MODEL 222 as of 11/27/14 

without CODE 487 (Active Body Control (ABC)) 

without CODE M005 (4MATIC) 

MODEL 222 up to 11/26/14 

without CODE 487 (Active Body Control (ABC)) 

MODEL 222.178 as of 11/27/14 

with CODE M005 (4MATIC) 

without CODE 487 (Active Body Control (ABC)) 

Shown on MODEL 222 

	Notes on AIRmatic		AH32.22-P-1000-02LF
	Remove/install
1	Empty AIRmatic using diagnostic system
			AD00.00-P-2000-04B
2	Remove front left complete wheel
			AP40.10-P-4050HA
3	Remove front left fender liner		AR88.10-P-1300LF
4	Unclip electrical line (1)
5	Detach pressure line (2)	Pressure line to central reservoir	*BA32.22-P-1007-03F
6	Unclip expansion rivet (3)
7	Remove bolts (4)	Screw/bolt, bracket of central reservoir to body	*BA32.22-P-1003-03F
8	Remove central reservoir (5)	Guide the guide lug (7) into the elastomer bearing (6).
9	Install in the reverse order

Number	Designation		MODEL 217	MODEL 222
BA32.22-P-1003-03F	Screw/bolt, bracket of central reservoir to body	Nm	20	20

Number	Designation		MODEL 217	MODEL 222
BA32.22-P-1007-03F	Pressure line to central reservoir	Nm	5	5