General Notes On Touch-Up Applicators And Paint Spray Cans - Ah98.00-P-9409-06A
Model 117, 118, 124, 126, 129, 140, 156, 163, 164, 166, 167, 168, 169, 170, 171, 172, 176, 177, 190, 192, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 230, 231, 232, 236, 238, 240, 242, 243, 245.2, 246, 247, 251, 253, 254, 257, 290, 292, 293, 294, 295, 296, 297, 461, 463
Model 450, 451, 452, 454
Model 464, 465
Model all (Light transporter)
Touch-up paint pens and paint spray cans are only suitable for temporarily touching up minor paint damage such as, e.g. stone marks or scratches. They are not to be used for the original repair paintwork on the outer panels because they cannot reproduce the original condition.
Repairing minor paintwork damage
With this kind of damage, and also in the repair of this damage, the entire paint structure is often damaged right down to the sheet metal.
For reasons of quality and corrosion protection, a primer must be applied before touching up the top coat in such cases.
Processing instructions are printed on the touch-up paint pens and in the leaflet provided inside the caps of the spray cans.
Touch-up paint pens:
- Primer stick for metal parts
The cap contains a rust scraper which should be used to eliminate rust spots and loose paint.
- Top coat touch-up paint pens for standard and metallic paints
#G#L#P#V
Body outer skin
- Standard finish (glossy)
- Metallic paintwork set (metallic base coat and clear-coat, glossy)
Model 450, 451, 452, 454
Body outer skin (TRIDION)
- Paintwork set (base coat and clearcoat, gloss)
#G#L#P#V
Detachable parts made of plastic
- Uni-color paintwork for the colors 7129 galinite gray and 7167 deep dark gray (silk gloss)
- Metallic paintwork kit (metallic base coat and clear varnish) for contrasting colors for side moldings (silk gloss)
Model 450, 451, 452, 454
Plastic detachable parts (customized body panel=CBS)
- Paintwork set (base coat and clearcoat, gloss)
Paint spray cans:
- Primer spray can for metal parts
The cap contains a repair kit (rust scraper, sanding paper and filler) for eliminating minor rust spots and other uneven areas.
Do not use for repairing plastic parts.
- Top coat spray cans (flat paint and metallic finish)
Body outer skin
#G#L#P#V
- Standard finish
- Metallic paintwork set (metallic base coat and clearcoat)
Model 450, 451, 452, 454
- Paintwork set (base coat and clearcoat, gloss)
Detachable parts made of plastic
#G#L#P#V
- Uni-color paintwork for the colors 7129 galinite gray and 7167 deep dark gray (silk gloss)
- Metallic paintwork kit (metallic base coat and clear varnish) for contrasting colors for side moldings (silk gloss)
On clearcoat systems with higher scratch resistance the instructions provided must be followed (service information).
Model 450, 451, 452, 454
- Paintwork set (base coat and clearcoat, gloss)