Remove/Install Side Cover Panel For Panoramic Sliding Sunroof - AR77.21-S-0116E

Model 447.7/8, 448.8 

Courtesy of MERCEDES-BENZ USA

Shown on right cover panel (1) 

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
Notice	Notes on carrying out repair work in the vehicle interior		AH68.00-D-0001-01KOS
	Remove/install
1	Open panoramic sliding sunroof (2) approx. 5 cm.
2	Switch off ignition.
3	Starting from the rear, unclip left and/or right cover panel (1) from panoramic sliding sunroof (2) and remove.	Carefully unclip cover panel (1) by hand. Danger of breakage. : First position cover panel (1) with hook (arrow A) in opening (arrow B) at panoramic sliding sunroof (2) Ensure cover panel (1) is correctly seated on panoramic sliding sunroof (2).
4	Install in the reverse order