Remove/Install Panoramic Sliding Sunroof Control Unit - AR77.21-S-1281E
Model 447.7/8, 448.8
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notice | Notes on carrying out repair work in the vehicle interior | AH68.00-D-0001-01KOS | |
| Remove/install | |||
| 1 | Remove rear headliner | Model 447.7 with code V23 (Interior trim, premium version) except code ZH6 (Marco Polo ACTIVITY) Model 447.8 except code ZK7 (Equipment line MARCO POLO) Model 448.8 |
AR68.30-S-7608E |
| 2 | Disconnect electrical connector (1) | ||
| 3 | Push control unit of panoramic sliding sunroof (PSD) (N98) in direction of arrow, and remove | ||
| 4 | Install in the reverse order | ||
| 5 | Synchronize panoramic roof (2) with diagnostic system and perform teach-in run for automatic reversing function | ||
| AD00.00-S-2000-04E | |||
| Check | |||
| 6 | Perform function test of panoramic sliding sunroof and roller sun blind |