Remove/Install Manual Pop-Up Roof Lock Bottom Section - AR77.70-S-0013E
Model 447.7/8
With Code ZK9 (Lifting roof hatch)
Shown on left side of vehicle
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notice | Notes on carrying out repair work in the vehicle interior | AH68.00-D-0001-01KOS | |
| Remove/install | |||
| 1 | Open pop-up roof | AR77.70-S-0001-01E | |
| 2 | Mark assembly position of corresponding locking bottom section (1) | ||
| 3 | Unscrew bolts (2) at corresponding locking bottom section (1) and remove locking bottom section (1) | *BA77.70-Z-1001-01KOB | |
| 4 | Install in the reverse order |
MECHANICAL POP-UP ROOF
| Number | Designation | Model 447.7/8 with code ZK9 (Lifting roof hatch) | |
|---|---|---|---|
| BA77.70-Z-1001-01KOB | Bolt, locking bottom section to roof cutout for pop-up roof | Nm | 10 |