Electric Wiring Diagram For Anti-Theft Alarm System Control Unit (ATA) - PE80.50-S-2101-97VVB
Model 447.6 with code FY1 (Anti-Theft Protection package) except code M8E (Electric motor 85 kW/battery 60 kWh (usable)) except code ME0 (Electric motor 85 kW) except code XM0 (Facelift) except code XM7 (MOPF II) except code ZL3 (National version for Latin America) N26/6
Model 447.7 with code FY1 (Anti-Theft Protection package) except code M7E (Electric motor 150 kW/battery 60 kWh (usable)) except code ME0 (Electric motor 85 kW) except code ME4 (Electric motor 145 kW) except code XM0 (Facelift) except code XM7 (MOPF II) except code ZL3 (National version for Latin America) N26/6
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 15L |
| B44/1 | Interior protection sensor | 4L |
| H3/1 | Alarm siren with additional battery | 6L |
| K40/10 | Engine compartment fuse and relay module | 10L |
| K40/10f201 | Fuse 201 | 9L |
| N26/6 | Anti-theft alarm system (ATA [EDW]) control unit | 9D |
| N70 | Overhead control panel (OCP [DBE]) control unit | 4A |
| N70 | Overhead control panel (OCP [DBE]) control unit | 12A |
| N70e4 | Anti-theft alarm system readiness indicator | 8A |
| N70s8 | Interior protection switch | 7A |
| N70s9 | Towing sensor button | 7A |
| W2 | Right front lamp unit ground point | 6G |
| X227/1 | Main wiring harness/fuse and relay module electrical connector 2 | 8G |