(Wiring Diagram For Instrument Cluster (IC) Control Unit - PE54.30-S-2101-97VMA)
Model 447.6/7 with code ME0 (Electric motor 85 kW) except code XM7 (MOPF II) A1/1
Model 447.6 with code M8E (Electric motor 85 kW/battery 60 kWh (usable)) except code XM7 (MOPF II) A1/1
Model 447.7 with code M7E (Electric motor 150 kW/battery 60 kWh (usable)) except code XM7 (MOPF II) A1/1
Model 447.7 with code ME4 (Electric motor 145 kW) except code XM7 (MOPF II) A1/1
| Code: | Designation: | Position: |
|---|---|---|
| AO | Color code key | 32L |
| A1/1 | Instrument cluster (KI) control unit | 4A |
| A1/1 | Instrument cluster (KI) control unit | 12A |
| A1/1 | Instrument cluster (KI) control unit | 20A |
| CAN B | Interior CAN | 20K |
| CAN E | Chassis CAN | 8K |
| CAN E | Chassis CAN | 12K |
| CAN E | Chassis CAN | 16K |
| Code M7E | Electric motor 150 kW/battery 60 kWh (usable) | 10D |
| Code M8E | Electric motor 85 kW/battery 60 kWh (usable) | 10E |
| Code MEO | Electric motor 85 kW | 6D |
| Code ME4 | Electric motor 145 kW | 10D |
| K40/11 | Firewall fuse and relay module | 3L |
| K40/11f88 | Fuse 88 | 2K |
| N73 | Electronic ignition lock (EZS) control unit | 16L |
| W1/9 | Right cockpit ground point | 5G |
| X18/81x1 | Left cockpit/main wiring harness electrical connector 1 | 11H |
| X228/1 x2 | Cockpit wiring harness/fuse and relay module electrical connector 2 | 2G |
| X313 | Interior CAN (CAN B) potential distributor electrical connector | 20L |
| X314 | Chassis CAN (CAN E) potential distributor electrical connector | 8L |
| X330 | CAN for suspension (CAN E) potential distributor electrical connector | 12L |
| Z37/105 | Front-end CAN low end sleeve | 15F |
| Z37/106 | Front-end CAN high end sleeve | 11F |
| Z6/187 | Cockpit ground connection connector sleeve 3 | 4E |