(Blind Spot Assist Wiring Diagram - PE54.71-S-2100-97VMA)
Model 447.6 with code JA7 (Blind Spot Monitoring) with code M8E (Electric motor 85 kW/battery 60 kWh (usable)) except code XM7 (MOPF II) B161/3, B161/4
Model 447.7 with code JA7 (Blind Spot Monitoring) with code M7E (Electric motor 150 kW/battery 60 kWh (usable)) except code XM7 (MOPF II) B161/3, B161/4
Model 447.7 with code JA7 (Blind Spot Monitoring) with code ME4 (Electric motor 145 kW) except code XM7 (MOPF II) B161/3, B161/4
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 40L |
| B161/3 | Left rear Blind Spot Assist radar sensor | 15A |
| B161/3 | Left rear Blind Spot Assist radar sensor | 25A |
| B161/4 | Right rear Blind Spot Assist radar sensor | 19A |
| B161/4 | Right rear Blind Spot Assist radar sensor | 31A |
| CAN E | Chassis CAN | 3K |
| Code L | Valid for left-hand drive vehicles | 6G |
| Code R | Valid for right-hand drive vehicles | 7G |
| K40/11 | Firewall fuse and relay module | 7L |
| K40/11f90 | Fuse 90 | 6K |
| W29/10 | Right D-pillar ground point | 10B |
| X225/1x1 | Main wiring harness/firewall main wiring harness 1 electrical connector | 7H |
| X302 | Chassis CAN (CAN E) potential distributor electrical connector | 3L |
| X326x1 | Rear bumper Blind Spot Monitoring electrical connector 1 | 9E |
| Z268 | Blind Spot Assist ground connection end sleeve | 19F |
| Z268 | Blind Spot Assist ground connection end sleeve | 30F |
| Z268/1 | Blind Spot Assist tml. 15 connector sleeve | 21F |
| Z268/1 | Blind Spot Assist tml. 15 connector sleeve | 31F |
| Z37/95 | Front-end CAN (CAN G) low end sleeve | 14F |
| Z37/95 | Front-end CAN (CAN G) low end sleeve | 24F |
| Z37/96 | Front-end CAN (CAN G) high end sleeve | 13E |
| Z37/96 | Front-end CAN (CAN G) high end sleeve | 23E |