Check For Presence Of Holder And Information Label Of Auxiliary Battery (Code: VS2ZUSBAT) - SM54.10-S-0051A

Model 447.603/605 13 as of 683063 up to 867726

with code E28 (Additional battery for retrofitted consumers)

with code ZU7 (National version for Canada)

Model 447.603/605 13 as of 683063 up to 867726

with code E28 (Additional battery for retrofitted consumers)

with code ZU8 (National version for USA)

OPERATION NO. OF OPERATION TEXTS OR STANDARD TEXTS AND FLAT RATES

Category	Op. no.	Operation text	Time	Acc. no.	Code
P	02 0041	Operations: Make sure that the auxiliary battery's holder and information label are present	-	54 906 02	VS2ZUSBAT
P	02 0042	Operations: Retrofit holder of auxiliary battery (after check)	-	54 906 02	VS2ZUSBAT
P	02 0043	Operations: Retrofit information label of auxiliary battery (after check)	-	54 906 02	VS2ZUSBAT

Courtesy of MERCEDES-BENZ USA

	Risk of fire /risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.	No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
Notice	Notes on battery		AH54.10-P-0001-01A
Notice	Notes on carrying out repair work in the vehicle interior		AH68.00-D-0001-01KOS
	Check
1	Check if vehicle is affected by measure.	Affected vehicles: Check for presence of holder and information label of auxiliary battery (code: VS2ZUSBAT) For authorized Mercedes-Benz service partners, only the entry in the "Extended VEGA Application" (EVA) system, in the "Current" tab, is decisive. An additional test of the affected vehicles in the workshop information system (WIS) or vehicle list is thereby not necessary.	SM54.10-S-0051-01AAA
	Remove
2	Remove cover (1).	To do so, release catch hooks (arrows A) at side of left seat base and remove cover (1).
	Check
3	Make sure the auxiliary battery's (G1/1) holder (2) and information label (3) are present.
	Retrofit
4	Retrofit holder (2) of auxiliary battery (G1/1).	If the holder (2) is not present. Secure holder (2) of auxiliary battery (G1/1) using two screws. M6	*BA00.10-Z-1002-01KOA
5	Retrofit information label (3) of auxiliary battery (G1/1).	If information label (3) is not present. The information label's bonding area (3) must be absolutely free of dust and grease. Otherwise there may be adhesion problems. Clean information label's bonding area (3) with silicone remover. Silicone remover, order No. 893222600	*BR00.45-Z-1060-04A
	Install
6	Install cover (1).

HEADLESS SCREWS/BOLTS: SCREWS/BOLTS AND NUTS, COARSE-PITCH THREAD

Number	Designation			8.8	10.9
BA00.10-Z-1002-01KOA	M6	Galvanized	Nm	9	13
BA00.10-Z-1002-01KOA	M6	Phosphated	Nm	9	12

HEADLESS SCREWS/BOLTS: SCREWS/BOLTS AND NUTS, COARSE-PITCH THREAD

Number	Designation			12.9
BA00.10-Z-1002-01KOA	M6	Galvanized	Nm	16
BA00.10-Z-1002-01KOA	M6	Phosphated	Nm	14

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1060-04A	Silicone remover, order No. 893222600	Adolf Wurth GmbH & Co. KG Reinhold-Wurth-Str. 12-17 74653 Kunzelsau-Gaisbach Germany Tel. +49 7940 15-0 Fax +49 7940 15-1000 http://www.wuerth.de

PARTS ORDERING NOTE

Part no.	Designation	Quantity
N 910105 006006	Screw (if not present)	2
A 639 541 02 12	Holder (if not present)	1
A 639 584 11 17	Information label of auxiliary battery (G1/1) (if not present)	1