Electrical Function Schematic For Dynamic Idle Speed Increase - PE54.10-P-2063-97NAA
MODEL 166 up to model year 2016
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Alternator, signal | 5G |
| 2 | Engine running, signal | 8E |
| 2 | Engine running, signal | 13E |
| 3 | Battery sensor, signal | 14H |
| 4 | Alternator operating rate, signal | 7E |
| 4 | Alternator operating rate, signal | 12E |
| 5 | Idle speed increase, request | 5E |
| 5 | Idle speed increase, request | 10E |
| B95 | Battery sensor | 14K |
| CAN B | Interior CAN | 11F |
| CAN E1 | Chassis CAN 1 | 6F |
| Code 494 | USA version | 1E |
| G2 | Alternator | 7J |
| LIN B15 | Battery sensor LIN | 14J |
| LIN C1 | Drive train LIN | 6G |
| N10 | SAM control unit | 14E |
| N3/10 | ME-SFI [ME] control unit | 3G |
| N3/9 | CDI control unit | 3E |
| N3/9 | CDI control unit | 3B |
| N73 | Electronic ignition switch control unit | 9E |
| U1018 | Valid for gasoline engine 276 | 2H |
| U1032 | Valid for engine 278 and 157 | 2H |
| U2 | Valid for all except USA | 1D |
| U2 | Valid for all except USA | 1D |
| U74 | Valid for diesel engines | 6J |
| U74 | Valid for diesel engines | 1B |
| U75 | Valid for gasoline engines | 6J |
| U75 | Valid for gasoline engines | 1G |
| U880 | Valid for engine 642 | 2C |
| U948 | Valid for diesel engine 651 | 2F |
| U948 | Valid for diesel engine 651 | 2F |
| U948 | Valid for diesel engine 651 | 2D |
| U948 | Valid for diesel engine 651 | 2D |