Remove/Install Vacuum Pump - AR43.05-P-1320CDA
MODEL 166 with ENGINE 651
| Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | ||
| Remove/install | |||
| 1 | Open engine hood and raise to vertical position | AR88.40-P-1000GQ | |
| 2 | Remove upper engine cover | ||
| 3 | Disconnect intermediate pipe (7) from fitting (8) | ||
| 4 | Remove bolt (6) from intermediate pipe (7) | ||
| 5.1 | Remove center underfloor paneling | Model 166.006 with engine 651 |
AR61.30-P-1001GQ |
| 5.2 | Remove underfloor panels | Model 166.003/004 with engine 651 |
AR61.30-P-1001GQ |
| 6 | Remove left engine mount and slacken off right engine mount | Model 166.003/004 with engine 651 | AR22.10-P-1260GQA |
| 7 | Unlock vacuum line (1) and pull off vacuum pump (3) | ||
| 8 | Remove bolts (2) of vacuum pump (3) | *BA43.05-P-1001-01J | |
| 9 | Remove vacuum pump (3) | ||
| 10 | Install in the reverse order | ||
| 11 |
Clear fault memory using the diagnostic system | AD00.00-P-2000-04A | |
| Check | |||
| 12 | Risk of accident
from vehicle starting off by itself when engine running. Risk of injury
(bruises and burns) resulting from working on the engine while it is being started or when it is running. Perform engine test run, check engine and brake system for leaktightness and proper operation |
Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A |
VACUUM PUMP
| Number | Designation | Engine 651 in model 117, 156, 166, 172, 176, 204, 207, 218, 221, 246, 253 | |
|---|---|---|---|
| BA43.05-P-1001-01J | Bolt, vacuum pump to crankcase or oil pump | Nm | 9 |