Adjust Rear-Axle Toe - AR40.20-P-0261GQ
MODEL 166, 292
MODIFICATION NOTES
| 30.6.15 | Total toe at vehicle level | Model 166.0 except code 489/491/Z04/Z05 | BE40.20-P-1001-10P |
| 30.6.15 | Total toe at vehicle level | Model 166.0 with code 489, model 166.8 | BE40.20-P-1001-10P |
| 30.6.15 | Total toe at vehicle level | Model 166.0 with code 491 | BE40.20-P-1001-10P |
| 30.6.15 | Total toe at vehicle level | Model 166.0 with code Z04/Z05 | BE40.20-P-1001-10P |
| 30.6.15 | Total toe at vehicle level | Model 166 AMG | BE40.20-P-1001-10P |
| Adjust | |||
| 1 | Loosen nut (3) | ||
| 2 | Adjust toe using cam bolt (4) and eccentric disk (2) | Total toe at vehicle level | *BE40.20-P-1001-10P |
| Permissible difference in rear axle toe between right and left side of vehicle | *BE40.20-P-1002-10P | ||
| If the specifications are not achieved ↓ Replace tie rod (1) |
AR35.20-P-0109GZ | ||
| 3 | Tighten nut (3) | Permissible difference in rear axle toe between right and left side of vehicle | *BE40.20-P-1002-10P |
CHECK VALUES FOR REAR AXLE TOE
| Number | Designation | Model 166.0 except code 489/491/Z04/Z05 | Model 166.0 with code 489, model 166.8 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-10P | Total toe at vehicle level | -0.77° | ∠° | - | 0° 32' (± 7') |
| -0.64° | ∠° | - | - | ||
| 2.39° | ∠° | - | - | ||
| 3.36° | ∠° | 0° 23' (± 7') | - | ||
CHECK VALUES FOR REAR AXLE TOE
| Number | Designation | Model 166.0 with code 491 | Model 166.0 with code Z04/Z05 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-10P | Total toe at vehicle level | -0.77° | ∠° | - | 0° 32' (± 7') |
| -0.64° | ∠° | - | - | ||
| 2.39° | ∠° | 0° 25' (± 7') | - | ||
| 3.36° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE TOE
| Number | Designation | Model 166 AMG | Model 292 except code 489 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-10P | Total toe at vehicle level | -0.77° | ∠° | 0° 32' (± 7') | - |
| -0.64° | ∠° | - | 0° 29' (± 7') | ||
| 2.39° | ∠° | - | - | ||
| 3.36° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE TOE
| Number | Designation | Model 292 with code 489 | ||
|---|---|---|---|---|
| BE40.20-P-1001-10P | Total toe at vehicle level | -0.77° | ∠° | 0° 32' (± 7') |
| -0.64° | ∠° | - | ||
| 2.39° | ∠° | - | ||
| 3.36° | ∠° | - | ||
CHECK VALUES FOR REAR AXLE TOE
| Number | Designation | Model 166.0 except code 489/491/Z04/Z05 | Model 166.0 with code 489, model 166.8 | |
|---|---|---|---|---|
| BE40.20-P-1002-10P | Permissible difference in rear axle toe between right and left side of vehicle | ∠° | ± 15' | ± 15' |
CHECK VALUES FOR REAR AXLE TOE
| Number | Designation | Model 166.0 with code 491 | Model 166.0 with code Z04/Z05 | |
|---|---|---|---|---|
| BE40.20-P-1002-10P | Permissible difference in rear axle toe between right and left side of vehicle | ° | ± 15' | ± 15' |
CHECK VALUES FOR REAR AXLE TOE
| Number | Designation | Model 166 AMG | Model 292 except code 489 | |
|---|---|---|---|---|
| BE40.20-P-1002-10P | Permissible difference in rear axle toe between right and left side of vehicle | ° | ± 15' | ± 7' |
CHECK VALUES FOR REAR AXLE TOE
| Number | Designation | Model 292 with code 489 | |
|---|---|---|---|
| BE40.20-P-1002-10P | Permissible difference in rear axle toe between right and left side of vehicle | ° | ± 7' |