Check Condition Of Steering And Tie Rods - AP46.00-P-4651E
MODEL 166, 292
Shown in model 292
| Preparatory tasks | |||
| 1 | Release steering lock | ||
| Remove | |||
| 2 |
Remove center underfloor paneling | AR61.30-P-1001GQ | |
| Check | |||
| 3 | Check tie rod joint boots (1) on tie rod ends (3) for condition, leaktightness and correct seating | If there are problems: ↓ Rectify problem subject to separate repair order. |
|
| 4 | Check tie rod ball joints (2) for play by firmly pulling and pushing the tie rod ends (3) | If there are problems: ↓ Rectify problem subject to separate repair order. |
|
| 5 | Check tie rod ends (3) and tie rods (4) for firm connection by pulling and pushing each one | ↓ Rectify problem subject to separate repair order. |
|
| 6 | Check each of the inner tie rod ball joints for play by firmly pulling and pushing them on the tie rods (4) in the direction of the steering gear (8) | If there are problems: ↓ Rectify problem subject to separate repair order. |
|
| 7 | Stretch boots (5) by turning steering all way to the right and left, and check for cracks, intrusions and chafe marks | Otherwise, the material may be damaged, leading to leakage with consequential damage. If there are problems: ↓ Rectify problem subject to separate repair order. |
|
| 8 | Check clamps (6, 7) are firmly and correctly seated | Otherwise this may lead to leakage with consequential damage. If there are problems: ↓ Rectify problem subject to separate repair order. |
|
| 9 | Check steering (8) | If there are problems: ↓ Subject to separate repair order, replace steering (8) for safety reasons. |
|
| Install | |||
| 10 |
Install center underfloor paneling | AR61.30-P-1001GQ | |
| Finishing activity | |||
| 11 | Lower vehicle with lifting platform |