Instrument Cluster (IC), Operating Information - GF54.30-P-0002-05GR

MODEL 166 up to model year 2016 

Operating instructions 

Via the left multifunction steering wheel button group (S110) and right multifunction steering wheel button group (S111) various menu levels can be shown in the multifunction display (A1p13) of the instrument cluster (A1):

• It is possible to scroll in the main menu via the system selection button (S110s3).
• It is possible to scroll within a menu in the submenus or in lists using the scroll forward and back button (S110s1).
• The "Back" and voice control system off button (S110s4) can be used in each menu or submenu to jump into the next higher menu level.
• The O. K. button. (S110s6) is used to confirm the respective selection or pending messages.

All the buttons of the multifunction steering wheel button group are always installed. However the available functions depend on the equipment of the vehicle.

Overview of available menus (equipment-dependent):

• "Trip" menu 
• "Navi" (with CODE 509 (Navigation box) or CODE 512 (COMAND APS incl. DVD changer) or CODE 527 (COMAND APS with single DVD drive (with navigation))) 
• "Audio" menu 
• "Tel" menu 
• "Assist." menu 
• "Service" menu 
• "Settings" menu 
• "Offroad" menu (with CODE 430 (On & Offroad package)) 
• "AMG" menu (in model 166.074/874) 

"Trip" menu 

The following functions can be selected in the "Trip" menu:

• Show standard display or reset trip distance
• Show or reset trip computer "After start"
• Show or reset trip computer "After reset"
• Show range and current consumption indicator
• Display digital speedometer
• "ECO score" display (driving style analysis) (as of 01.07.2012 except model 166.074/874)

"Navi" (with CODE 509 (Navigation box) or CODE 512 (COMAND APS incl. DVD changer) or CODE 527 (COMAND APS with single DVD drive (with navigation))) 

Navigation notes are displayed in the "Navi" menu when the function is switched on.

If the function is deactivated, the direction of travel is shown along with cardinal points, e.g. "NW direction of travel".

"Audio" menu 

The following functions can be selected in the "Audio" menu:

• Select radio station
• Operate CD player/CD changer/DVD changer/DVD audio/MP3
• Operate DVD video
• Operate TV

"Tel" menu 

The name of the selected mobile telephone network is shown in the telephone menu when the function is switched on. It is still possible then to scroll through the stored telephone book and select an entry.

When the function is switched off the text "Telephone Off" is displayed.

If no telephone is detected when the function is switched on, the message "Ready for Bluetooth telephony" appears.

"Assist." menu 

The following functions can be selected in the "Assist." menu, depending on the equipment installed:

• Status overview of driver assistance systems (for vehicles not equipped with color display)

If all driver assistance systems are switched off, the message "All support systems switched off" appears.

• Display "Assist graphic" (as of 01.07.2012 on vehicles with color display)
• Switch "Speed Limit" on or off (with CODE 513 (Speed Limit Assist))
• Switch "COLLISION PREVENTION ASSIST" on or off (with CODE 252 (COLLISION PREVENTION ASSIST))
• Show "distance chart" (with CODE 233 (DISTRONIC PLUS))
• Switch on/off "PRE-SAFE® brake" (with CODE 233 (DISTRONIC PLUS))
• Switch "Attention Asst." on/off
• Switch on/off "Blind Spot Assist" (with CODE 234 (Blind Spot Assist) or with CODE 237 (Active Blind Spot Assist))
• Switch "Lane Keeping Assist" on or off (with CODE 476 (Lane Keeping Assist) or with CODE 238 (Active Lane Keeping Assist))

"Service" menu 

The following functions can be selected in the "Service" menu:

• Call up display messages
• Electronically check tire pressure loss warning (with CODE 477 (Tire pressure loss warning) or tire pressure (with CODE 475 (Tire pressure monitor (Premium)), Schrader)
• Service interval indicator "ASSYST PLUS"

"Settings" menu 

Changes to the following settings can be made in the "Settings" menu:

• "Instrument cluster"
• Lights
• "Vehicle"
• "Heater" (with CODE 228 (Stationary heater))
• "Comfort"
• "Manufacturer default setting"

In the "Light" submenu of the "Settings" menu on vehicles with CODE 621 (Intelligent Light System (left-hand traffic)) or with CODE 622 (Intelligent Light System (right-hand traffic)), the "Tourist function" menu item is included as of 01.07.2012. Here low beams can be adapted for left and right hand traffic.

In the "Vehicle" submenu of the "Settings" menu, the "Roof load recognition" menu item is included as of 01.07.2012. The "Roof load recognition" can be switched on or off here.

"Offroad" menu (with CODE 430 (On & Offroad package)) 

The "Offroad" menu displays the compass data. The current status of the differential lock and the rear axle differential lock and on vehicles with CODE 489 (AIRmatic (air suspension with level adjustment and adaptive damping system ADS)) the status of the air suspension are also shown.

"AMG" menu (in model 166.074/874) 

Various system information is displayed in the "AMG" menu.

The following submenus can be called up:

• "Warm Up" submenu 
• "SETUP" submenu 
• "Racetimer" submenu 

Submenus are shown in two display menus. The following information is shown in the upper static display level:

• Vehicle speed
• Gear range engaged (e.g.: P, R, N, D) or gear (1 to 7)
• Upshift indicator "UP"

An active upshift indicator "UP" is displayed in red. If the "AMG"- submenu is not activated an active upshift indicator is shown on top of all displayed information.

The specific information of the individual submenus is shown in the lower dynamic display level.

"Warm Up" submenu 

The following information can be displayed in the "Warm up" menu:

• Engine oil temperature (blue display at T < 80 °C, white display at T > 80 °C)
• Coolant temperature
• Stop/start active/inactive (additional information on "ECO" symbol in multifunction display)

"SETUP" submenu 

• The following information is displayed in the "SETUP" menu:
• Transmission mode setting ("C", "S", "S+" or "M")
• Status of Electronic Stability Program (ESP®) ("ESP® ON", "Sport Handling Mode" or "ESP® OFF")

"Racetimer" submenu 

Lap times driven as under racing conditions can be stopped in the "Race Timer" submenu.

The following information is displayed:

• Current lap time
• Best lap time
• "Race EVal" submenu:

• Lap display
• Lap times per lap
• Maximum speed reached per lap
• Average speed per lap
• Travel distance per lap

• "Race AllVal" submenu:

• Total lap time
• Maximum speed achieved over all laps
• Overall average speed
• Overall travel distance