Remove/Install Headlamp Range Adjustment Front Axle Sensor - AR82.10-P-4083GQ

MODEL 166 

as of model year 2016 

with CODE 640 (High-performance LED) 

MODEL 166 

as of model year 2016 

with CODE 641 (Headlamps, LED, dynamic, left-side traffic) 

MODEL 166 

as of model year 2016 

with CODE 642 (Headlamps, LED, dynamic, right-side traffic) 

MODEL 166 

with CODE 615 (Bi-xenon headlamps with active light function) 

MODEL 166 

with CODE 621 (Bi-xenon adapt. headl., left-s. traffic) 

MODEL 166 

with CODE 622 (Intelligent Light System) 

MODEL 292 

Shown on model 166 

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Remove/install
1	Lift vehicle on vehicle lift		AR00.60-P-1000GZ
2	Disconnect electrical connector from left front level sensor (B22/8) or right front level sensor (B22/9)
3	Unclip lever (2) at upper transverse control arm
4	Unscrew nut (3) and remove left front level sensor (B22/8) or right front level sensor (B22/9) with bracket	Nut, sensor with bracket to "mounting console for upper transverse control arm"	*BA82.10-P-1001-01B
5	Unscrew left front level sensor (B22/8) or right front level sensor (B22/9) from bracket	When replacing left front level sensor (B22/8) or right front level sensor (B22/9).
		Bolt/nut, level sensor to retaining plate	*BA82.10-P-1002-01B
6	Detach lever (2) from left front level sensor (B22/8) or right front level sensor (B22/9)	When replacing left front level sensor (B22/8) or right front level sensor (B22/9).
7	Install in the reverse order
	Initial startup
8	Connect diagnostic system, read out fault memory and adjust zero position of headlamps
			AD00.00-P-2000-04A
9	Check headlamp setting and correct if necessary
		Model 166 as of model year 2016 with code 640 (High-performance LED) Model 166 as of model year 2016 with code 641 (Headlamps, LED, dynamic, left-side traffic) Model 166 as of model year 2016 with code 642 (Headlamps, LED, dynamic, right-side traffic) Model 166 with code 615 (Bi-xenon headlamps with active light function) Model 166 with code 621 (Bi-xenon adapt. headl., left-s. traffic) Model 166 with code 622 (Intelligent Light System)	AP82.10-P-8260GZA
		Model 292	AP82.10-P-8260I

Number	Designation		Model 166	Model 292
BA82.10-P-1001-01B	Nut, sensor with bracket to "mounting console for upper transverse arm"	Nm	8	8

Number	Designation		Model 166	Model 292
BA82.10-P-1002-01B	Bolt/nut, level sensor to retaining plate	Nm	5	5