Component Description For Rear Display Left/Right - GF82.90-P-4020GN

MODEL 166 

as of model year 2016 

with CODE 864 (Rear compartment entertainment package) 

MODEL 292 

with CODE 864 (Rear compartment entertainment package) 

Shown on model 166.0 

Location 

The left rear display is located on the left front seat behind the head restraint.

The right rear display is located on the right front seat behind the head restraint.

The two rear displays are of identical design and the decision as to whether the rear display is shown on the left or the right side, is made by way of the pin assignment. On the right rear display, connector 1 on the rear of the display is not used for pin 5. The following description refers to the left rear display. It also applies to the right rear display accordingly.

Tasks 

• Visualization of all user-relevant information in rear entertainment system 
• Use of all audio equipment or video units installed at the rear display 
• Power and resource management 
• Human-Machine Interface (HMI) 
• Receive signals 
• Generation of picture signals 
• Generating radio signals 
• Transmitting signals 

Visualization of all user-relevant information in rear entertainment system 

• Graphic displays for user guidance
• Operation
• Display of digital picture signals

Use of all audio equipment or video units installed at the rear display 

Use also includes the management of the connected devices as well as detection of any connected video units. The following audio equipment or video units can be connected via the AUX jack, for example:

• Portable DVD player
• Cameras
• MP3 player
• Game consoles

Media sources connected via "AUX" must always be selected manually. Only then can connected video units be detected and their video signals played back.

Power and resource management 

The rear display recognizes overvoltage or undervoltage and reacts with an adapted switch on and off behavior.

Human-Machine Interface (HMI) 

The Human-Machine Interface enables the communication between the rear passenger or the rear passengers and the rear entertainment system by means of the infrared interfaces of the remote control and the rear display.

Receive signals 

• Direct lines 
• CAN 
• Infrared 

Direct lines 

The rear display receives the following signals via direct lines:

• Power supply via circuit 30g and circuit 31
• Y/C line (Y-brightness (luminance)/C-color information (chrominance)) for picture signals from the DVD player (A40/4)
• Stereo line for audio signals from the DVD player
• Analog video and audio signals from audio or video units connected via the AUX connections

CAN 

The rear display is a subscriber of the telematics CAN (CAN A) and communicates with the following components:

• DVD player
• COMAND controller unit (A40/3)

Infrared 

The rear display receives infrared signals from the remote control (A8/7) via the infrared interface

Generation of picture signals 

The rear display converts received analog picture signals into digital picture signals and displays them.

Generating radio signals 

The rear display generates digital radio signals from the analog audio signals for transfer to the radio frequency headphones (H8/3) (cordless) connected via the radio interface.

Transmitting signals 

• Output of audio signals 
• CAN 

Output of audio signals 

Output of audio signals via following options:

• To headphones connected by cable via the integrated headphones connection
• To the radio frequency headphones (cordless) connected via the radio interface

The volume of the audio signals can only be adjusted via the remote control for the headphones connected by cable to the headphones connection. With the radio frequency headphones (cordless), the volume is adjusted using the volume control integrated into the radio frequency headphones.

CAN 

The rear display is a subscriber of the telematics CAN and communicates with the following components:

• DVD player
• COMAND control unit

Connections and interfaces 

Body 

The rear display has the following components:

• 8"- TFT (Thin Film Transistor) color display in 16:9 format, maximum breakdown 800 X 480 pixels, color depth 3 X 6 bit (the rear display can display 262, 144 colors)
• Headphones connection (3.5 mm) with amplifier
• AUX connections (2 audio connections (white, red), 1 video connection (yellow))
• Infrared interface
• Radio interface

Set up of the screen, schematic 

Wiring diagram for DVD player control unit

PE82.60-P-2104-97NBA