Remove/Install Parktronic System (PTS) Control Unit - AR54.65-P-0006GQ

MODEL 166 with CODE 220 (PARKTRONIC) 

Shown on model 166.0 

Shown on model 166.8 

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Commission parking system control unit (N62)	When replacing the parking system control unit (N62).	AD00.00-P-2000-04A
2	Switch off ignition and store transmitter key outside of transmission range (min. 2 m)
3.1	Remove backrest in left rear	Model 166.0 with code 220 (PARKTRONIC)	AR91.12-P-1620GQ
3.2	Fold back left rear seat	Model 166.8 with code 220 (PARKTRONIC)
4	Fold up left seat cushion	Model 166.0 with code 220 (PARKTRONIC)
5	Remove left rear door sill molding		AR68.30-P-4100GQ
6.1	Lift floor covering	Model 166.0 with code 220 (PARKTRONIC)	AR68.20-P-4800GQ
6.2	Remove side paneling in left side of luggage compartment	Model 166.8 with code 220 (PARKTRONIC)	AR68.30-P-4800GQX
7	Separate electrical connections (1)
8	Unscrew nuts (2)
9	Remove parking system control unit (N62)
10	Install in the reverse order