000 588 07 82 00 Filling Unit - WS14.00-P-0014B

MODEL ALL (4xWD) with CODE MC7 (Engine OM 642 D 30 BlueTEC) 

MODEL ALL (CAR) with CODE U42 (BlueTEC diesel exhaust treatment (SCR)) 

MODEL ALL (CAR) with CODE U77 (Diesel Emission control BLUETEC (SCR)) 

MODEL ALL (CAR) with CODE U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3) 

Use in FG 14/49 Set A/B Purpose: 

AdBlue® filling system for drop free charging of SCR storage tank.

Procurement information: 

Sale of this workshop equipment does not take over the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier can be found below.

Manufacturer 1 

Leitenberger GmbH

• Model: AdBlue® filling system

  Article number: ABE 02_MB

• Accessories: extension 30 mm

  Article number: ET 652_30

• Accessories: extension 80 mm

  Article number: ET 652_80

Manufacturer 2 

lumatic Hermann Lummen GmbH

• Calibration capable: 

  Device for countries with a duty to calibrate

  • Type/model: AUS32MobilDB

    Article number: AUS32MobilDB

  • Type/model: AUS32IBCW and

    Article number: AUS32IBCW and

• Not calibration capable: 
  • Type/model: AUS32MobilDB

    Article number: AUS32MobilDB/NE

• Cannot be calibrated USA version: 
  • Type/model: AUS32MobilDB

    Article number: AUS32MobilDB/US

Manufacturer 3 

Flaco Gerate GmbH

• Calibration capable: 

  Device for countries with a duty to calibrate

  • Type/model: FLACOblue200MID Article no.: 40603462
• Not calibration capable: 
  • Type/model: FLACOblue200 Article no.: 40603461