Remove/Install Combustion Chamber Pressure Sensor - AR07.04-P-0065OGR

ENGINE 642 in MODEL 166, 292 

Shown on MODEL 292 

	Risk of injury.  Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Notes on avoiding damage through contamination and foreign objects		AH00.00-P-5000-01A
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Remove engine cover	Ensure correct seating of the engine cover.
2	Remove engine air intake duct downstream of air filter		AR09.10-P-8130OGR
3	Remove left and right air filter housing		AR09.10-P-1150OGR
4	Remove left or right sound dampener on cylinder head cover
5	Replace the combustion chamber sensor (B4/34, B4/35, B4/36, B4/37, B4/38, B4/39)	Engine 642 in model 166, 292 Engine 642 in model 166 with code 927 (EU6 emissions standard) Combustion chamber pressure sensor to cylinder head	AR07.04-P-0065-01LFD  *BA07.04-P-1018-01G
6	Connect diagnostic system and read out fault memory; delete if necessary		AD00.00-P-2000-04A
7	Install in the reverse order

SENSORS

Number	Designation			Engine 642
BA07.04-P-1018-01G	Combustion chamber pressure sensor to cylinder head	Stage 1	Nm	5
		Stage 2	∠°	90