000 588 11 21 00 Adjustment Device - WS82.00-P-0151B

MODEL ALL (4xWD, BUS, CAR, Heavy transporter, Light transporter, TRUCK, UNIMOG, smart)

Use in FG 54/82/Set B

Purpose:

Headlamp aimer for adjusting headlamps.

Test equipment category CAT_B.

NOTE: The headlamp aimer comprises a visual light box, permanently installed guide rails and a starting-off marking.

Technical Note:

Headlamp aimer can also be used for mounting the calibration target for camera systems W 000 588 00 23 00.

Reference information:

This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier is available below.

Manufacturer 1

MAHA Maschinenbau Haldenwang GmbH & Co.

Type/model: MLT 1000 MB

Item no. VP 185069

Manufacturer 2

Beissbarth GmbH

Type/model: MLD110

Article no.: 1692104334

Manufacturer 3

Hella Gutmann Solutions GmbH

Type/model: SEG IV MB

Article number: 8PA 007 732-331