LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2016 >> GLE450 AMG >> Repair and Diagnosis >> Collision >> Sealing & Corrosion Protection >> Body Sealing, Corrosion Protection - 292 Chassis >> Testing & Repair >> Seam Sealing Following Repair, Rear End Damage - AR97.10-P-4000-02GQ

Seam Sealing Following Repair, Rear End Damage - AR97.10-P-4000-02GQ

MODEL 166, 292 

  1. Seal connecting flanges in repaired areas with body sealant.

    IMPORTANT Observe standard sealing. Seal only primed body parts. Install plastic stoppers and grommets with sealant.

  2. Seal spot welds and rivets in repaired area with seam sealant material.

IMPORTANT Keep sealant out of threads on weld nuts and threaded bolts by masking or covering with cardboard sleeves. Also keep drain openings and contact surfaces for axle attachments, windows and detachable parts free of sealant. It is necessary to seal accessible spot weld flanges on both sides. If accessible from one side, only seal corresponding surface.

IMPORTANT We differentiate between smoothing/wiping off (A) and sealing/

G11970797

Shown on outer rear end assembly on model 166 

G11970798

Shown on wheel well and right bottom rear end assembly on model 166 

G11970799

Shown on wheel well and left bottom rear end assembly on model 166 

G11970800

Shown on entire undercarriage on model 166 

G11970801
scientia non olet · About LEMON Manuals