Install Windshield - AR67.10-P-1503-01P

MODEL 117, 156, 169, 171, 172.4, 176, 177, 203, 205, 207, 209, 211.0/2/6, 212, 213, 217, 218, 222, 230.4, 231, 238, 242, 245.2, 246, 253, 292, 414.700 

1. Open side window in driver door.

   The side window should remain open during the curing time. Otherwise the windshield (1) can be pressed toward outside by the air when a door is closed.

2. Position both cup suction tools on outside of windshield (1).
3. Together with a helper, center windshield (1) above windshield cutout in body flange and position congruent with tape strips (arrows).
4. Position windshield (1) on adhesive bead and press on until it rests on rubber window spacers and sealing lip.

   Install windshield (1) within 10 min of applying adhesive material.

   Adhesion of adhesive material will otherwise be impaired.

   Observe manufacturer's specifications for curing time of adhesive material.

   Shown on model 169