Roll Control - Check Fluid Level - AP32.34-P-3210A
MODEL 166 with CODE 468 (ACTIVE CURVE SYSTEM)
| Notes on active roll stabilization | AH32.34-P-0001-01A | ||
| Check | |||
| 1 |
Open engine hood | AR88.40-P-1000GQ | |
| 2 | Clean cap (1) and surrounding area | ||
| 3 | Check and correct fill level in expansion reservoir (2) | In the event of fluid loss: ↓ determine the cause and rectify (subject to a separate invoice). |
|
| 4 | Seal expansion reservoir (2) | ||
| 5 |
Close engine hood | AR88.40-P-1000GQ |