Wiring Diagram For Gasoline Direct Injection System Control Unit - PE07.08-P-2101-97NBE
ENGINE 276.9 in MODEL 166 as of model year 2016 Control unit N3/10, vehicle connector, engine side, sheet 2
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 23L |
| B11/4 | Coolant temperature sensor | 8L |
| B17 | Intake air temperature sensor | 2L |
| B2/5 | Hot film mass air flow sensor | 5L |
| B2/5b1 | Intake air temperature sensor | 6L |
| Code 920 | Gasoline direct injection with stratified charge | 3F |
| Code 920 | Gasoline direct injection with stratified charge | 13F |
| Code 920 | Gasoline direct injection with stratified charge | 1F |
| N3/10 | ME-SFI [ME] control unit | 4A |
| N3/10 | ME-SFI [ME] control unit | 12A |
| N3/10 | ME-SFI [ME] control unit | 11L |
| N3/10 | ME-SFI [ME] control unit | 20A |
| Y87/1 | Right exhaust gas recirculation positioner | 19L |
| Y87/1b1 | Right exhaust gas recirculation Hall sensor | 18L |
| Y87/1m1 | Right exhaust gas recirculation actuation motor | 19L |
| Y87/2 | Left exhaust gas recirculation positioner | 15L |
| Y87/2b1 | Left exhaust gas recirculation Hall sensor | 16L |
| Y87/2m1 | Left exhaust gas recirculation actuation motor | 15L |
| Z5z1 | Sensor voltage supply connector sleeve | 17E |
| Z7/44 | Ground connection connector sleeve | 8G |
| Z7/44 | Ground connection connector sleeve | 2G |
| Z7/44 | Ground connection connector sleeve | 15E |