Remove/Install Parktronic System (PTS) Sensors In Front Bumper - AR54.65-P-0001GQ
MODEL 166.0 up to model year 2016 with CODE 220 (PARKTRONIC)
MODEL 166.8 (except 166.874) up to model year 2016 with CODE 220 (PARKTRONIC)
MODEL 166.874 with CODE 220 (PARKTRONIC)
Shown on model 166.873
Shown on model 166.873
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1.1 | Remove daytime running lamps headlamp | For removal of left outer front parking system distance sensor (B8/1), left center front parking system distance sensor (B8/2), right center front parking system distance sensor (B8/5) and right outer front parking system distance sensor (B8/6). Model 166.0 (except 166.074) up to model year 2016 with code 220 (PARKTRONIC) Model 166.8 (except 166.874) up to model year 2016 with code 220 (PARKTRONIC) |
AR82.10-P-2300GQ |
| 1.2 | Remove front bumper | For removal of left inner front parking system distance sensor (B8/3) or right inner front parking system distance sensor (B8/4). |
AR88.20-P-2000GQ |
| 2 | Unfasten clips (3k) and remove impact absorber (3) | For removal of inner distance sensors (B8/3), (B8/4). | |
| Check | |||
| 3 |
Check impact absorber (3) for damage General information on the impact absorber | AH88.20-P-1000-01A | |
| 4 | Push retaining lugs (1) in direction of arrow and pull corresponding distance sensor (B8/1), (B8/2), (B8/3), (B8/4), (B8/5) or (B8/6) out of bracket (2) | Otherwise, the corresponding distance sensor (B8/1), (B8/2), (B8/3), (B8/4), (B8/5) or (B8/6) may malfunction. |
|
| 5 | Disconnect electrical connection (4) | ||
| 6 | Install in the reverse order | ||
| Initial startup | |||
| 7 | Check operational readiness of Parktronic by switching on ignition, engaging reverse gear and releasing parking brake |