Checking Shock Absorber - AR32.25-P-0121LWG
Model 213, 238, 253, 293
| Check | |||
| 1 | Raise vehicle. | AR00.60-P-1006A | |
| 2 | Check front shock absorber for external oil leakage. | Model 213 except code 489 (AIRMATIC) Model 238, 253 except code 489 (AIR BODY CONTROL) Model 293 In the event of a problem, ↓ Replace front shock absorbers. |
|
| Model 238 except code 489 (AIR BODY CONTROL) |
AR32.25-P-1018LWO | ||
| Model 213 except code 489 (AIRMATIC) |
AR32.25-P-1018LW | ||
| Model 253 except code 489 (AIR BODY CONTROL) Model 293 |
|||
| 3 | Check rear shock absorber for external oil leakage. | In the event of a problem, ↓ Replace rear shock absorbers. |
|
| Model 213, 253, 293 | AR32.25-P-0110LW | ||
| Model 238 | AR32.25-P-0110LWO | ||
| 4 | Check elastomer bearings of rear shock absorbers. | In the event of a problem, ↓ Replace rear shock absorbers. |
|
| Model 213, 253, 293 | AR32.25-P-0110LW | ||
| Model 238 | AR32.25-P-0110LWO | ||
| Remove | |||
| 5 | Remove front shock absorber. | If damage is suspected that cannot however be detected in installed condition. | |
| Model 238 except code 489 (AIR BODY CONTROL) |
AR32.25-P-1018LWO | ||
| Model 213 except code 489 (AIRMATIC) |
AR32.25-P-1018LW | ||
| Model 253 except code 489 (AIR BODY CONTROL) Model 293 |
|||
| 6 | Remove rear shock absorbers. | If damage is suspected that cannot however be detected in installed condition. | |
| Model 238 | AR32.25-P-0110LWO | ||
| Model 213, 253, 293 | AR32.25-P-0110LW | ||
| Check | |||
| 7 | Check piston rod for surface damage, corrosion, bending and unobstructed movement in pilot bushings. | With removed shock absorber. In the event of a problem, ↓ replace shock absorbers. |
|
| Install | |||
| 8 | Install front shock absorber. | If the shock absorber has been removed. | |
| Model 238 except code 489 (AIR BODY CONTROL) |
AR32.25-P-1018LWO | ||
| Model 213 except code 489 (AIRMATIC) |
AR32.25-P-1018LW | ||
| Model 253 except code 489 (AIR BODY CONTROL) Model 293 |
|||
| 9 | Install rear shock absorbers. | If the shock absorber has been removed. | |
| Model 238 | AR32.25-P-0110LWO | ||
| Model 213, 253, 293 | AR32.25-P-0110LW |