Remove/Install Supporting Joint At Wheel Carrier (Wheel Carrier Installed) - AR35.20-P-0116LW

Model 205 (except 205.386/387/486/487) 

Model 213 (except 213.088/089/288/289) 

Model 253 (except 253.388/389/988/989) 

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Notes on repair work on suspension components		AH00.00-P-0100-01A
	Remove/install
1	Remove spring control arm	Model 213.064/264	AR35.20-P-0119MND
		Model 205 (except 205.386/387/486/487)
		Model 253 (except 253.388/389/988/989/992/993)	AR35.20-P-0114LW
		Model 253.992/993	AR35.20-P-0119RFW
		Model 213 (except 213.064/088/089/164/264/288/289)	AR35.20-P-0119LWE
2	Remove supporting ball joint from wheel carrier	Model 205 (except 205.386/387/486/487)
		Model 253 (except 253.388/389/988/989)	AR35.20-P-0116-01LW
		Model 213 (except 213.088/089/288/289)	AR35.20-P-0116-01OLC
		Antifriction paste, rubber parts 2.5 kg, DBL 6867.00	*BR00.45-Z-1002-06A
		Removal and installation tool	Fig 1
		Insertion tool	Fig 2
3	Install in the reverse order

Fig 1: Identifying Removal And Installation Tool (202 589 00 43 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Insertion Tool (204 589 02 43 00)

Courtesy of MERCEDES-BENZ USA